Maytag Centennial Washer Not Spinning (Reasons & Fixes)

Dealing with a Maytag Centennial washer that refuses to spin can be incredibly frustrating. It means you can’t get your laundry done until you figure out and fix the problem. But why is your Maytag Centennial Washer Not Spinning? Well, there are a few common reasons for this issue, and some of them might also prevent your washer from draining properly. In some cases, your clothes might even get stuck mid-cycle without getting properly washed or dried.

If your Maytag Centennial washer isn’t spinning, it could be caused by simple issues like clothes getting stuck, imbalance, or incorrect settings. It might also result from more complex problems such as a clogged drain, blockage in the drum, or malfunctioning components like the lid switch, motor coupling, drive belt, clutch, transmission, or shift actuator.

In this guide, we’re going to tackle three major issues that could be causing your Maytag Centennial washer to have any spin cycle problems. Plus, we’ll walk you through how to put your washer into diagnostic mode. This will help you uncover any hidden error codes and potentially reset your washer to get it back to working order.

So, let’s dive right in and get your Maytag Centennial washer spinning smoothly again!

Maytag centennial washer not spinning

Troubleshooting Guide for Maytag Centennial Washer Not Spinning

[table id=3 /]

Why Your Maytag Centennial Washer Isn’t Spinning: Common Causes & DIY Fix

Here are six common reasons why a Maytag Centennial washer may refuse to spin:

1. Clothes Tangled or Unevenly Distributed

If you stuff too many clothes into your Maytag Centennial washer, it might be the reason why your Maytag Centennial Washer not spinning. When it’s overloaded, the washer can’t handle the bulk, and even if it tries to spin, your clothes will probably stay wet. That’s why Maytag suggests filling it up to about three-quarters full – it leaves enough space for your clothes to spin properly.

But even if you don’t overload it, your clothes might still not spin if they’re all bunched up in there. So, when you load your Centennial washer, make sure the clothes are spread out evenly inside.

How to Fix:
If you’ve overloaded the washer, take out some clothes to make it about three-quarters full. Also, spread the clothes out evenly so they can spin around smoothly in there. This should get your Maytag Centennial washer spinning like it should!

2. Machine Shaking or Unstable

Your Centennial washer might not spin if it’s not balanced. This can happen if its legs are loose or if it’s sitting on an uneven surface. So, you need to find out which of these reasons is causing your washer to not turn, especially when it shakes when you turn it on.

It’s important to know that uneven laundry can often be caused by an unbalanced washer. So, by fixing the balance issue, you could actually solve two problems at once.

What causes a Maytag Centennial washer not to spin

How to fix:

  1. Check if the washer’s legs are loose. If they are, tighten them up and make sure they are all the same length.
  2. Ensure that the washer is placed on a stable and even surface. If it’s not, move it to a better spot.
  3. Before starting the washer, check the clothes inside to make sure they are evenly spread out. If not, rearrange them so they’re distributed evenly. This should help your Centennial washer spin properly again!

3. Wrong Cycle for Delicate Fabrics

Choosing the wrong setting on your washer could be the reason it won’t spin bulky clothes properly. For instance, if you pick a Low-Spin cycle, the washer will spin very slowly, and you might not even notice it. And if you accidentally choose the No-Spin cycle, your washer won’t spin at all.

Even if you select settings like Delicate, Hand Washing, or Gentle for bulky clothes, they might not spin as they should. So, it’s important to pick the right setting based on the type of clothes you’re washing.

How to fix:

  1. Double-check that you’ve chosen the correct setting on your washer. If you’ve accidentally set it to No-Spin or Low-Spin for bulky clothes, change it to a high-speed setting.
  2. Reserve No-Spin or Low-Spin settings for less bulky items or when you need more soaking and less spinning.

4. Slow or No Drainage

Your Centennial washer may not spin if the water isn’t draining properly. When the drain hoses get clogged, water gets stuck in the washer tube. This could lead to your washer not spinning correctly, and you’ll end up with wet clothes after the cycle.

To fix this issue, you should check the drain hose to make sure water can flow out smoothly.

How to fix:

Disconnect the drain pipe to take a look at it for any clogs or dirt. If you find it’s clogged, run hot water through it to clear the blockage.

5. Blocked or Jammed Drum

Your washer might not be spinning because there’s something blocking it inside the drum. First, check if there’s any stuff like dirt or objects in the drum that could be stopping it from turning.

If you don’t find any dirt or objects, the blockage could be clothes that got stuck. It might even be a mix of both things causing the problem.

How to fix:
Take a look inside the washer’s drum to see if there’s any dirt, objects, or trapped clothes. If you find any, make sure to remove them before you start the washer again.

6. Malfunctioning Internal Component

If your Maytag Centennial washer not spinning, and none of the other reasons we talked about before are causing it, there might be something wrong with some important parts inside. These parts can get old, damaged, or just stop working correctly, which stops the washer from spinning.

Maytag centennial washer stopped spinning

Here are these parts and what they do:

  1. Lid switch: This makes sure the washer only works when the lid is closed. If it’s broken, the washer won’t spin.
  2. Motor coupling: It connects the motor to the transmission system. If it’s damaged, the washer might not spin.
  3. Drive belt: If this belt is loose or broken, the washer won’t spin like it should.
  4. Clutch: This part connects the transmission system to the inside of the washer. If it’s worn out, the washer won’t spin.
  5. Transmission: It’s a crucial part that helps the washer spin, but over time, it can wear out.
  6. Shift actuator: If this is broken, the washer won’t spin either.

How to fix:
Carefully check all these parts to see if they are damaged or not working right. If you find any that are worn out or broken, you might need to replace them. If you’re not sure how to DIY, it’s a good idea to get in touch with a laundry machine expert for help.

Additional Problems with Maytag Centennial Washer Spinning

Maytag Centennial Washer Stopped Spinning Mid-Cycle

Sometimes, your Centennial washer might unexpectedly stop spinning during a wash. This can happen for a few reasons:

  1. Wrong Cycle Selection: If you accidentally pick a low-spin or no-spin cycle in the middle of a wash, the washer will stop spinning.
  2. Power Problems: A power failure, like a tripped breaker or a blown fuse, can also cause your washer to stop mid-cycle. Keep an eye out for power outages too.

These issues can disrupt your laundry day, but understanding why your washer stops spinning can help you fix it.

Maytag Centennial Washer Not Spinning Clothes Dry

If your Maytag Centennial washer isn’t spinning your clothes dry, a few things might be causing it:

  1. Wrong Settings: Check if you accidentally selected a no-spin or low-spin setting. To get your clothes drier, try using a high-spin setting.
  2. Load Issues: If your load is too big or unbalanced, the washer might have trouble spinning. You can fix this by reducing the load size and making sure the clothes are evenly spread out.
  3. Stability Problems: If your washer isn’t stable or if the drain is clogged, it might not spin properly. Also, keep an eye out for power outages, a faulty lid switch, or too many suds.

How to Activate Diagnostic Mode on Your Maytag Centennial Washer?

If you’re not sure why your Centennial washer isn’t spinning, putting it in diagnostic mode can help. This special mode can reveal hidden error codes that might explain the problem. Here’s how to do it:

  1. Start by turning off your washer, but don’t unplug it.
  2. Then, turn the control knob to the 12 o’clock position.
  3. Next, rotate the knob three times clockwise, then once counterclockwise, and finally, one more time clockwise.

Maytag Centennial Washer Not Spinning or Draining

If your Maytag Centennial washer isn’t spinning or draining, it’s likely due to a few common reasons. Firstly, it might be because you’ve put too many clothes in the washer, causing it to struggle with the load. Check to make sure the clothes aren’t jammed inside.

Another potential issue could be a clogged drain pipe. Take a look at the drain pipe to see if there’s anything blocking it, and if you find any obstructions, be sure to clear them. Also, be cautious about using excessive detergent, as it can lead to too many suds, hindering the washer’s performance.

Additionally, consider the possibility of a malfunctioning lid switch. If the lid switch isn’t working correctly and doesn’t allow the lid to close properly, it can disrupt the washer’s operation.

Lastly, worn-out components like the clutch or transmission can also be culprits when your washer won’t spin. These parts can wear down over time and might need replacement to restore the washer’s spinning capability.

How to Reset a Maytag Centennial Washer?

Sometimes, you can solve problems with your washer and clear error codes by giving it a reset. Here’s how to reset your Maytag Centennial washer:

  1. Unplug your washing machine and leave it unplugged for about 20 seconds.
  2. After 20 seconds, plug it back in and restart the washer.
  3. If the washer still doesn’t reset and you’re facing persistent issues, try unplugging it for at least 10 minutes. This longer break can sometimes help resolve the problem.

Final Thoughts

Understanding how to fix a Maytag Centennial washer not spinning is essential for keeping your laundry routine running smoothly. By troubleshooting common issues like unbalanced loads, incorrect settings, and potential component malfunctions, you can resolve problems and ensure your washer spins efficiently. Remember, a little attention to detail can go a long way in keeping your Centennial washer in top working condition.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *